Installation Accessories

The TL-PTB16 from Networx® is a direct 66 and 110/88 blade replacement for the TL-PT1000 Punch Down Tool.

The TL-PT1066-K from Secure Cable Ties is an ideal solution for all of your 66 punch down needs.

The TL-PTB66 from Networx® is a direct 66 blade replacement for the TL-PT1000 Punch Down Tool.

Networx® Suface Mount Boxes offer a great soluion for almost any type of voice or data installation.

Networx® Suface Mount Boxes offer a great soluion for almost any type of voice or data installation.

The TL-CRTF4 from Networx® is full cycle ratchet fiber optic crimp tool which is capable of crimping a variety of fiber optic cables.

Networx® simple D-Sub Insertion/Extraction tool is used for inserting or removing terminals from D-sub housings. This tool fits contacts for standard d-sub housings.

The TL-MCT468E from Networx® is a great solution for crimping RJ-11/45 connectors. It is the ALL-IN-ONE tool that can strip, cut, and crimp.

Ergonomic Scissors from Networx® offer a great solution for cutting the protective Kevlar of fiber optic cables.

The patented EXO Crimp Frame® with EXO-EX Die™ was developed to terminate larger cables and conductors (typically Cat6/6A). EXO Crimp Frame with EXO-EX Die™ is designed for the ezEX-RJ45® connectors.

The TL-STF6 Fiber Optic Strip Tool from Networx® is a quality built tool with carbon steel and a black oxide finish that will last well into the future.

The TL-PT1000 from Networx® is the ideal solution for replacing that tired old Punch Down Tool.

The TL-NT1145 Multi-Modular Cable tester from Networx® is a great tool when needing to build your own network cables or for simple troubleshooting of network issues.

The TL-MCT468P from Networx® will make terminating RJ-11/45 cables a snap. It is the ALL-IN-ONE tool that can strip, cut, and crimp.

Sharpen those blades with the replacement blade for Networx 90 Degree SpeedTerm tools!

Replace those worn down blades with the TL-CRTRBE replacement blade from Networx®.

The TL-STRBUN from Networx® is the ideal solution when a replacement blade is needed for the TL-STUNIV cable stripper.

The TL-STCOAX from Networx® is the supreme solution when looking for a simple Coaxial Cable Stripper.

The TL-STCOAX from Networx® is the supreme solution when looking for a simple Coaxial Cable Stripper.

The TL-CCT596 from Networx® will make terminating RG59/6 cables a snap. Fully compatible with BNC, RCA and F connectors for both RG59 and RG6.

The TL-CCT59611 from Networx® will make terminating RG59/6/11 cables a snap. Fully compatible with BNC, RCA and F connectors for both RG59 and RG6. The TL-CCT59611 is also compatible for use with F connectors on RG11.

The TL-STUNIV from Networx® is a great stripping tool that can handle multiple types of cables. The TL-STUNIV is capable of stripping UTP/STP cable along with CAT5e, CAT6 and round telephone cable.

The SpeedTerm Modular Crimp Tool from Networx® will make terminating RJ-11/45 cables a snap. It is the ALL-IN-ONE tool that can strip, cut, and crimp.

Looking for fast? Look no further than this SpeedTerm™ tool from Networx®! COMPATIBLE ONLY WITH Networx® CAT6 90 Degree Speed Termination Keystone Jacks